Introduction
E-glass woven roving is a glass fabric woven from the ¡°direct roving¡± formed from 2000-tip bushings. Woven roving is used primarily for FRP composites produced by hand lay-up and large molding presses. Typical products include boats, automobile parts, storage tanks, furniture and other FRP products. |
 |
Product Characteristics
1. Low Fuzz, low dirt, low impurity and without stains.
2. Fast Wet-out.
3. Even thickness .
4. Good covering and degassing properties.
5. High mechanical strength and high wet strength retention. |
 |
Technical specifications
R2O Content |
<0.8% |
Coupling Agent |
Silane |
Moisture Content |
¡Ü 0.1% |
LOI |
0.55¡À0.2% |
Fiber Diameter |
17mm |
Compatible Resins |
Polyester and Vinyl ester |
Implementation of Standards
This product meets the requirements of Q/TTG004-1998 codes. And we have been approved by the Lloyd's Register of London.
Standard Products Specifications
Product No. |
Unit Weight (g/m 2 ) |
Roll Width (mm) |
Roll Weight (kg) |
EWR570-1000
EWR570-1270
EWR570-2000 |
570
570
570 |
1000
1270
2000 |
40
50
80 |
EWR800-1000
EWR800-1270
EWR800-1524
EWR800-2000 |
800
800
800
800 |
1000
1270
1524
2000 |
40
50
60
80 |
*Special products are according to customer's requirements.
Packing
Woven rovings are rolled around a mandrel paper roller. The rolled products are wrapped in plastic bags and put into cardboard boxes or by pallets , 16 rolls on each pallet .
|
